LR3/Disco 3
The seat motors are a permanent magnet motor type coupled to a rack and pinion assembly. Should the motor seize or
stick an internal thermal cut-out switch will trip to remove voltage from the motor. Two pins within each of the seat switch
packs control the seat motors. Both pins are normally earthed. Operating the switch applies voltage to one of the pins
while the other pin remains earthed. Operating the switch in the opposite direction reverses power and earth to the motor
allowing the motor to run in the opposite direction.
DRIVERS MEMORY SEAT
The memory seat control module can store up to three different driver seating and mirror positions for each key (up to 3
keys). The three-numbered memory and single memory store switches control memory storage and recall operations.
Each switch is a momentary action push switch.
All seat adjustments are available whilst the ignition key is in position I or II or for a time period from when either the driver
door status is changed or the ignition key status changes from position I to position 0 (key in).
NOTE :
Item Part Number
Description
1
-
Memory store button
2
-
Memory preset buttons
3
-
Seat adjustment controls
This does not include lazy entry where the door is not required to be open, or the ignition key is in position I or II.
