LR3/Disco 3
Installation
Remove the 16 hog rings.
1 .
Install the rear seat backrest cover.
Install the 16 hog rings.
Attach the 4 clips.
2 .
Install the rear seat backrest assembly.
Tighten the Torx bolts to 45 Nm (33 lb.ft).
3 .
Connect the backrest heater mat electrical connector.
Attach the rear seat cushion side clip.
4 .
Install the rear seat release handle finisher.
Tighten the screw.
5 .
Install the rear seat release handle.
6 .
Install the rear seat head restraint retaining clips.
7 .
Install the rear seat head restraint.
8 .
Install the luggage strap tether.
9 .
Install the rear seat cushion side finisher.
Tighten the screws.
10 .
Install the outer backrest hinge cover.
Tighten the screws.
Tighten the screw.
11 .
Install the inner backrest hinge cover.
Attach the clips.
Tighten the screw.