LR3/Disco 3
Installation
1 .
Install the seat track assembly.
Tighten the Torx bolts to 25 Nm (18 lb.ft).
2 .
Install the front seat cushion assembly.
Tighten the Torx bolts to 25 Nm (18 lb.ft).
Connect and secure the electrical connectors.
3 .
Install the front seat base.
Tighten the nuts to 25 Nm (18 lb.ft).
4 .
Install the front seat base trim.
Secure in the clips.
Tighten the screw.
5 .
Install the front seat cushion side trim.
Secure in the clips.
Tighten the screws.
6 .
Install the front safety belt buckle. For additional information, refer to
Front Safety Belt Buckle
(76.73.30)
(Section 501-20)