LR3/Disco 3
Installation
3 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the 2 door glass retaining clips.
Remove the 2 Torx screws.
Remove the 2 spacing washers.
Remove the 2 flat washers.
Note their fitted positions.
1 .
Install the 2 door glass retaining clips.
Install the spacing washers.
Install the 2 flat washers.
Tighten the Torx screws to 8 Nm (6 lb.ft).
2 .
Install the front door window glass.