LR3/Disco 3
Install the auxiliary socket panel.
Connect the electrical connectors.
Secure with the clips.
6 .
Install the floor console lid.
Install the covers.
Tighten the Torx bolts to 3 Nm (2 lb.ft).
7 .
Install the floor console.
Tighten the Torx bolts to 10 Nm (7 lb.ft).
Install the Torx bolt covers.
Connect and secure the electrical connectors.
8 .
Install the cigar lighter assembly closing panel.
Secure with the clips.
9 .
Install the floor console upper trim panel. For additional information, refer to
Floor Console Upper
Panel (76.25.11)
(Section 501-12)