LR3/Disco 3
Installation
Remove the rubber insert.
Remove the plastic insert.
Remove the screw.
Release the 8 clips.
1 .
Install the floor console upper panel.
Tighten the screw.
Install the rubber insert.
Install the plastic insert.
2 .
Install the parking brake switch.
Connect the electrical connector.
Install the screw.
Install the plastic insert.
3 .
Install the floor console liner.
4 .
Install both cup holder inserts.
5 .
Install the ride and handling optimization switch assembly. For additional information, refer to
Ride
and Handling Optimization Switch (86.65.11)
(Section 204-06)