LR3/Disco 3
Instrument Panel - 4.0L (76.46.23/99)
Removal
Published : Sep 29, 2004
1 .
Remove the intake manifold. For additional information, refer to
Intake Manifold (30.15.02)
(Section
303-01)
2 .
Evacuate the A/C system. For additional information, refer to
Air Conditioning (A/C) System
Recovery, Evacuation and Charging (82.30.02)
(Section 412-00)
3 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
4 .
Drain the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
5 .
Remove the floor console. For additional information, refer to
Floor Console (76.25.01)
(Section 501-
12)
6 .
Remove both cowl side trim panels. For additional information, refer to
Cowl Side Trim Panel
(76.13.27)
(Section 501-05)
7 .
Remove the driver side closing trim panel.
Release the clip.
Remove the 2 screws.
Disconnect the electrical connector.
8 .
Remove the passenger side closing trim panel.
Release the clip.
Remove the 2 screws.