LR3/Disco 3
CAUTION: Before disconnecting or removing the components, ensure the area around the
joint faces and connections are clean. Plug open connections to prevent contamination.
Disconnect 2 heater hoses from the bulkhead.
Release the 2 clips.
23 .
Release 2 A/C lines from the body.
Remove the nut.
24 .
CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.
Release 2 A/C lines from the bulkhead.
Remove the bolt.
Remove and discard the O-ring seals.
25 .
Remove the 2 adaptor panels.
Remove the 4 nuts.