LR3/Disco 3
Front Door Latch (76.37.12)
Removal
Published : Jul 15, 2005
1 .
Remove the window motor and regulator assembly. For additional information, refer to
Front Door
Window Regulator and Motor (86.25.03)
(Section 501-11)
2 .
CAUTION: Release the exterior door handle and screw cover clips from inside the door.
Remove the front door exterior handle. For additional information, refer to
Exterior Front Door
Handle (76.58.07)
(Section 501-14)
3 .
Release the remote control cable.
Release the grommet.
4 .
Release the door exterior handle mechanism.
Remove the adhesive tape from the access hole.
Remove the Torx screw.
Remove the locking pin.
5 .
Remove the front door latch assembly.
Disconnect the electrical connector.
Remove the 3 Torx screws.
6 .
NOTE :
