LR3/Disco 3
Tailgate Latch (76.37.83)
Removal
Installation
Published : Apr 29, 2004
1 .
Remove the tailgate speaker assembly. For additional information, refer to
Tailgate Speaker
(86.50.47)
(Section 415-03)
2 .
Remove the tailgate latch assembly.
Remove the 3 Torx bolts.
Disconnect the electrical connector.
Remove the latch.
Remove the latch plate.
Remove the latch actuator assembly.
3 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the latch actuator.
Remove the 2 screws.
1 .
Install the latch actuator.
Tighten the screws.
2 .
Install the tailgate latch assembly.
Install the latch actuator assembly.