LR3/Disco 3
Windshield Washer Reservoir (84.10.03)
Removal
Published : Apr 21, 2004
1 .
Remove the front bumper. For additional information, refer to
Front Bumper (76.22.49)
(Section 501-
19)
2 .
Remove the windshield washer reservoir filler neck.
Release the washer reservoir filler neck from the coolant tank clip.
Remove and discard the seal.
3 .
NOTE :
Some fluid spillage is inevitable during this operation.
Remove the windshield washer reservoir.
Remove the bolt.
Drain the washer reservoir fluid.
Disconnect the 3 electrical connectors.
Disconnect the 3 hoses.