LR3/Disco 3
Installation
7 .
Remove the parking aid sensor wiring harness.
Remove the 9 securing straps.
8 .
Remove the headlamp washer jet hose.
Release from the 5 clips.
1 .
Install the headlamp washer jet hose.
Secure in the 5 clips.
2 .
Install the parking aid sensor wiring harness.
Install the securing straps.
3 .
Install the parking aid sensors.
Connect the parking aid electrical connectors.
4 .
Install the washer jets. For additional information, refer to
Headlamp Washer Jet (84.20.08)
(Section
501-16)
5 .
Install the front bumper cover.
Connect the parking aid sensor wiring harness electrical connectors.
Connect the head lamp washer jet hose to the washer pump.
Install the screws.
6 .
Install the fender mouldings. For additional information, refer to
Fender Moulding (76.43.54)
(Section