LR3/Disco 3
Front Safety Belt Buckle (76.73.30)
Removal
Published : Aug 9, 2004
WARNING: It is imperative that before any work is undertaken on the SRS system, the appropriate
information is read thoroughly.
WARNING: Always disconnect both battery cables before beginning work on the SRS system.
Disconnect the ground cable first. Never reverse connect the battery.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00)
3 .
Remove the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-10)
4 .
Remove the seat backrest hinge cover.
Remove the 2 screws.
5 .
Remove the front safety belt buckle.
Remove the Torx bolt.
Disconnect the 2 electrical connectors.
Release the wiring harness.
