LR3/Disco 3
Second Row Safety Belt Retractor (76.73.23)
Removal
Installation
Published : Apr 29, 2004
1 .
Remove the C-pillar upper trim panel. For additional information, refer to
C-Pillar Upper Trim Panel
(76.13.35)
(Section 501-05)
2 .
Remove the C-pillar lower trim panel. For additional information, refer to
C-Pillar Lower Trim Panel
(76.13.34)
(Section 501-05)
3 .
Release the safety belt upper anchor.
Remove and discard the Torx bolt.
4 .
Remove the second row safety belt retractor.
Remove and discard the Torx bolt.
1 .
Install the second row safety belt retractor.
Tighten the Torx bolt to 40 Nm (30 lb.ft).
2 .
Install the safety belt upper anchor.
Tighten the Torx bolt to 40 Nm (30 lb.ft).
3 .
Install the C-pillar lower trim panel. For additional information, refer to
C-Pillar Lower Trim Panel
(76.13.34)
(Section 501-05)