LR3/Disco 3
As paint oven temperatures used in a repair workshop are significantly lower than those that are used during manufacture
of the vehicle, a different process is required to replace the seals.
After a repair that involves replacement of a section containing expanding foam acoustic seals, the new expanding foam
acoustic seal is installed to the new section and injected with an approved sound dampening foam. The sound dampening
foam should be injected after paint refinishing. When injecting the foam, ensure the foam fills a complete cross section of
the cavity and around the expanding foam acoustic seal.
Position of acoustic seals, front reinforcement
Position of acoustic seals, rear quarter panel
Item
Description
Function Service part No
1
A-pillar upper inner Acoustic EUH000520
2
B-pillar lower inner
Acoustic EUH000560
3
Rocker panel middle Acoustic EUH000670
4
A-pillar lower inner
Acoustic EUH000550
5
B-pillar lower outer
Acoustic EUH000570
6
Rocker panel outer Acoustic EUH000680
7
A-pillar lower inner
Acoustic EUH000540
8
A-pillar upper outer Acoustic EUH000530
