LR3/Disco 3
Fender Apron Panel
Removal
Published : Sep 16, 2004
1 .
Disconnect both the battery cables. For additional information, refer to
Specifications
(Section 414-
00 Charging System - General Information)
2 .
Remove the front fender. For additional information, refer to
Fender (76.10.24)
(Section 501-02
Front End Body Panels)
3 .
Remove the hood latch panel. For additional information, refer to
Hood Latch Panel (76.16.22)
(Section 501-27 Front End Sheet Metal Repairs)
4 .
Remove the radiator. For additional information, refer to
Radiator (26.40.01)
(Section 303-03C
Engine Cooling - 2.7L Diesel)
5 .
Remove the radiator coolant expansion tank. For additional information, refer to
Coolant Expansion
Tank (26.15.01)
(Section 303-03C Engine Cooling - 2.7L Diesel)
6 .
L/H side: Remove the power steering fluid reservoir. For additional information, refer to
Power
Steering Fluid Reservoir - 2.7L Diesel (57.15.08)
(Section 211-02 Power Steering)
7 .
Remove the hood.
8 .
Remove both hood support struts.
9 .
Remove the hood wiring harness.
10 .
Remove both wiper arms and blades.
11 .
Remove the plenum chamber panel. For additional information, refer to
Plenum Chamber
(80.15.62)
(Section 412-01 Air Distribution and Filtering)
12 .
L/H side: Remove the battery.
13 .
Remove the wiring harness
14 .
R/H side: Release the ABS modulator.
15 .
Remove the air cleaner. For additional information, refer to
Air Cleaner (19.10.01)
(Section 303-
12A Intake Air Distribution and Filtering - 4.0L)
16 .
Remove the insulation from outer bulkhead.
17 .
L/H side: Remove the fuel fired booster heater. For additional information, refer to
Fuel Fired
Booster Heater (80.40.01)
(Section 412-02B Auxiliary Heating)
18 .