LR3/Disco 3
Fender Apron Panel Closing Panel
Removal
NOTE :
Installation
Published : Sep 16, 2004
In this procedure the fender apron closing panel is replaced in conjunction with the fender apron panel or the
fender apron panel reinforcement.
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
2 .
Remove the fender apron panel. For additional information, refer to
Fender Apron Panel
(Section
501-27 )
3 .
Remove the fender apron panel reinforcement. For additional information, refer to
Fender Apron
Panel Reinforcement
(Section 501-27 )
4 .
Item Description
1
7 plug welds.
2
2 spot welds.
3
2 spot welds.
4
5 plug welds.
5 .
For additional information:
Welding. For additional information, refer to
Body Repairs
(Section 501-25A Body Repairs
- General Information)
Corrosion protection. For additional information, refer to
Corrosion Protection
(Section
501-25B Body Repairs - Corrosion Protection)
Tolerance checks. For additional information, refer to
Body and Frame
(Section 501-26
Body Repairs - Vehicle Specific Information and Tolerance Checks)
1 .
Install is the reversal of removal.
