LR3/Disco 3
Fender Apron Panel Reinforcement Rear Section
Removal
Published : Sep 16, 2004
1 .
Disconnect both the battery cables. For additional information, refer to
Specifications
(Section 414-
00 )
2 .
Remove the front fender. For additional information, refer to
Fender (76.10.24)
(Section 501-02 )
3 .
L/H side: Remove the battery junction box. For additional information, refer to
Battery Junction Box
(BJB) - 2.7L Diesel (86.70.55)
(Section 418-00 Module Communications Network)
4 .
L/H side: Remove the battery.
5 .
R/H side: Remove the air cleaner. For additional information, refer to
Air Cleaner (19.10.01)
(Section
303-12C )
6 .
R/H side: Release the ABS modulator.
7 .
Remove the wiring harness.
8 .
Remove the plenum chamber panel. For additional information, refer to
Plenum Chamber (80.15.62)
(Section 412-01 Air Distribution and Filtering)
9 .
Remove the hood.
10 .
Remove both hood support struts.
11 .
Remove the hood wiring harness.
12 .
Item
Description
1
3 spot welds.
2
34 plug welds.
3
7 spot welds.
4
Acoustic seal.
5
Butt weld.
