LR3/Disco 3
Fender Apron Panel Section
Removal
Published : Sep 15, 2004
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
2 .
Remove the front fender. For additional information, refer to
Fender (76.10.24)
(Section 501-02
Front End Body Panels)
3 .
Remove the hood latch panel. For additional information, refer to
Hood Latch Panel (76.16.22)
(Section 501-27 Front End Sheet Metal Repairs)
4 .
Remove the radiator coolant expansion tank. For additional information, refer to
Coolant Expansion
Tank (26.15.01)
(Section 303-03C Engine Cooling - 2.7L Diesel)
5 .
L/H side: Remove the power steering fluid reservoir. For additional information, refer to
Power
Steering Fluid Reservoir - 2.7L Diesel (57.15.08)
(Section 211-02 Power Steering)
6 .
Remove the air cleaner. For additional information, refer to
Air Cleaner (19.10.01)
(Section 303-12C
Intake Air Distribution and Filtering - 2.7L Diesel)
7 .
Remove the hood.
8 .
Remove both hood support struts.
9 .
Remove the hood wiring harness.
10 .
L/H side: Remove the battery.
11 .
Remove the Wiring harness.
12 .
R/H side: Release the ABS modulator.
13 .
L/H side: Remove the fuel fired booster heater. For additional information, refer to
Fuel Fired
Booster Heater (80.40.01)
(Section 412-02B Auxiliary Heating)
14 .
L/H side: Remove the battery junction box. For additional information, refer to
Battery Junction Box
(BJB) - 2.7L Diesel (86.70.55)
(Section 418-00 Module Communications Network)
15 .
Item
Description
1
5 spot-welds
2
Butt weld
3
9 mig-plug welds.
4
5 mig-plug welds.
