LR3/Disco 3
Front Wheelhouse Section
Removal
NOTE :
NOTE :
Published : Sep 29, 2004
This procedure requires the body to be removed from the integrated body frame.
In this procedure the front wheelhouse section is replaced in conjunction with the front side member section, front
wheelhouse reinforcement, hood latch panel and front crossmember.
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00 )
2 .
Remove the front side member section. For additional information, refer to
Front Side Member
Section (77.30.20/21)
(Section 501-27 )
3 .
Remove the front wheelhouse reinforcement. For additional information, refer to
Front Wheelhouse
Reinforcement
(Section 501-27 )
4 .
Remove the crossmember. For additional information, refer to
Front Crossmember (77.20.25)
(Section 501-27 )
5 .
Remove the hood latch panel. For additional information, refer to
Hood Latch Panel (76.16.22)
(Section 501-27 )
6 .
Item
Description
1
Butt weld
2
15 spot welds.
3
7 plug welds, 9 spot welds.
4
20 spot welds.
5
9 plug welds.
7 .
For additional information:
Welding. For additional information, refer to
Body Repairs
(Section 501-25A Body Repairs
- General Information)
Corrosion protection. For additional information, refer to
Corrosion Protection
(Section
501-25B Body Repairs - Corrosion Protection)
