LR3/Disco 3
Hood Latch Panel (76.16.22)
Removal
NOTE :
Published : Jun 30, 2004
If the hood latch panel coating is damaged or scratched, it must be repaired using the approved coating.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the front bumper. For additional information, refer to
Front Bumper (76.22.49)
(Section 501-
19)
3 .
Release the power steering fluid reservoir and position aside.
Release the clip.
4 .
Release the washer reservoir filler neck from the coolant tank clip.
5 .
Remove the 2 coolant expansion tank mounting bolts.
6 .
Release the coolant expansion tank.
Lift coolant expansion tank vertically.
7 .
Remove the radiator securing pegs.
