LR3/Disco 3
Roof Panel
Removal
NOTE :
NOTE :
Published : Sep 20, 2004
The roof opening panel is supplied with the reinforcement roof aperture.
This procedure shows removal of the roof opening panel. For vehicles with a fixed roof, the procedure is similar.
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
2 .
Remove both side air curtain modules. For additional information, refer to
Side Air Curtain Module
(76.74.40)
(Section 501-20B Supplemental Restraint System)
3 .
Remove the windshield glass. For additional information, refer to
Windshield Glass (76.81.01)
(Section 501-11 Glass, Frames and Mechanisms)
4 .
Remove both rear quarter window glass. For additional information, refer to
Rear Quarter Window
Glass (76.81.20)
(Section 501-11 Glass, Frames and Mechanisms)
5 .
If applicable, remove roof opening panel. For additional information, refer to
Roof Opening Panel
(76.84.01)
(Section 501-17 Roof Opening Panel)
6 .
If applicable, remove glass roof panel. For additional information, refer to
Glass Roof Panel
(76.81.05)
(Section 501-11 Glass, Frames and Mechanisms)
7 .
Remove both front seats. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-
10 Seating)
8 .
Remove the rear seat. For additional information, refer to
Rear Seat - Vehicles With: 60/40 Split Seat
(78.10.70/78.10.71)
(Section 501-10 Seating)
9 .
Release the wiring harness from both A-pillars.
10 .
Release the wiring harness from the roof.
11 .
Remove the liftgate.
12 .
Remove both front door and rear door aperture weatherstrip.
13 .
Remove the tailgate weatherstrip.
14 .
Remove both front safety belt retractors. For additional information, refer to
Front Safety Belt
Retractor (76.73.13)
(Section 501-20A Safety Belt System)
15 .
Remove both second row safety belt retractors. For additional information, refer to
Second Row
Safety Belt Retractor (76.73.23)
(Section 501-20A Safety Belt System)