LR3/Disco 3
9 .
Remove the insulation from the outer and inner bulkhead.
10 .
Remove the front and rear door weatherstrip.
11 .
Remove the cowl side trim panel. For additional information, refer to
Cowl Side Trim Panel
(76.13.27)
(Section 501-05 )
12 .
Release the A-Pillar wiring harness.
13 .
Remove the footrest.
14 .
Remove the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-
10 )
15 .
Remove the front safety belt retractor. For additional information, refer to
Front Safety Belt
Retractor (76.73.13)
(Section 501-20A )
16 .
Remove the rocker panel outer trim.
17 .
Release the front carpet.
18 .
Item
Description
A
Cut line 55mm (2.165 inches) from A-Pillar trim hole.
1
Butt welds.
2
30 spot welds.
3
8 spot welds.
