LR3/Disco 3
A-Pillar Reinforcement
Removal
NOTE :
Published : Oct 4, 2004
In this procedure the A-Pillar reinforcement is replaced in conjunction with the A-Pillar outer panel.
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00 )
2 .
Remove the A-Pillar outer panel. For additional information, refer to
A-Pillar Outer Panel
(Section
501-29 )
3 .
Remove the instrument panel. For additional information, refer to
Instrument Panel - 2.7L Diesel
(76.46.23/99)
(Section 501-12 )
4 .
Item
Description
A
Cut line 80mm (3.149 inches) from edge of A Pillar reinforcement.
1
Butt weld.
2
30 spot welds.
3
17 spot welds.
5 .
Item
Description
1
Butt weld