LR3/Disco 3
B-Pillar Outer Panel
Removal
Published : Sep 29, 2004
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00 )
2 .
Remove the rear door assembly.
Disconnect the electrical connector
Release the wiring harness grommet
Release the wiring harness retaining clip
Remove the 2 bolts
3 .
Remove front door striker.
4 .
Remove the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-10 )
5 .
Remove the rear seat. For additional information, refer to
Rear Seat - Vehicles With: 60/40 Split Seat
(78.10.70/78.10.71)
(Section 501-10 )
6 .
Remove the B-pillar side impact sensor. For additional information, refer to
B-Pillar Side Impact
Sensor (76.74.23)
(Section 501-20B )
7 .
Remove the side air curtain module. For additional information, refer to
Side Air Bag Module
(76.74.30)
(Section 501-20B )
8 .
Remove the wiring harness from the B-pillar.