LR3/Disco 3
B-Pillar Reinforcement
Removal
NOTE :
NOTE :
Published : Sep 21, 2004
In this procedure the B-Pillar reinforcement is replaced in conjunction with the B-pillar outer panel.
The B-Pillar closing panel is fitted with the B-Pillar reinforcement.
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
2 .
Remove the B-pillar outer panel. For additional information, refer to
B-Pillar Outer Panel
(Section
501-29 Side Panel Sheet Metal Repairs)
3 .
Item
Description
A
Cut line 140.0mm (5.51 inches)
1
Butt weld.
2,3
81 spot welds. (including the B-Pillar closing panel.)
4 .
Item
Description
1
Butt weld.
2
Acoustic seal.
