LR3/Disco 3
Rocker Panel (77.40.60)
Removal
Published : Sep 20, 2004
1 .
Load vehicle onto ramp.
2 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
3 .
Remove the rear wheel and tire.
4 .
Remove the rear fender splash shield.
5 .
Remove the front fender. For additional information, refer to
Fender (76.10.24)
(Section 501-02
Front End Body Panels)
6 .
Release the front door check strap from the A-pillar and release the rear door check strap from the
B-pillar.
Remove the 2 Torx bolts.
7 .
Remove the front and rear door assemblies.
Disconnect the electrical connector
Release the wiring harness grommet
Release the wiring harness retaining clip
Remove the 2 bolts