LR3/Disco 3
28 .
Release the front and back carpet.
29 .
Remove rear wheel and tire.
30 .
Remove rear bumper cover. For additional information, refer to
Rear Bumper Cover (76.22.74)
(Section 501-19 )
31 .
Remove forced air extraction grille.
32 .
R/H side: Remove fuel tank. For additional information, refer to
Fuel Tank (19.55.01)
(Section 310-
01C )
33 .
R/H side: Remove the fuel tank filler pipe. For additional information, refer to
Fuel Tank Filler Pipe
(19.55.07)
(Section 310-01C )
34 .
R/H side: Remove the fuel filler interlock catch. For additional information, refer to
Fuel Filler
Interlock Catch (19.55.17)
(Section 501-03 )
35 .
Remove the rear quarter window glass. For additional information, refer to
Rear Quarter Window
Glass (76.81.20)
(Section 501-11 )
36 .
Remove the exhaust heatshields.
37 .
Remove the tailgate latch. For additional information, refer to
Liftgate Latch (76.37.19)
(Section
501-14 )
38 .
Remove tailgate weatherstrip.
39 .
With assistance remove the tailgate.
40 .
Remove the load space trims.
41 .
Remove the load space carpets.
42 .
Release wiring harness.
43 .
Item
Description
A
Cut line is 55mm (2.165 inches) from A-Pillar trim hole.
1
Butt weld.
2
Cut line and butt weld.
3
Butt weld.
4
50 spot welds.
5
Butt weld.
6
5 spot welds.
7
40 spot welds.