LR3/Disco 3
9 .
Remove front door striker.
10 .
Remove the insulation from the outer and inner bulkhead.
11 .
Remove the front and rear door weatherstrip.
12 .
Remove the footrest.
13 .
Release the A-Pillar wiring harness.
14 .
Remove the front safety belt retractor. For additional information, refer to
Front Safety Belt
Retractor (76.73.13)
(Section 501-20A )
15 .
Remove the B-Pillar side impact sensor. For additional information, refer to
B-Pillar Side Impact
Sensor (76.74.23)
(Section 501-20B )
16 .
Remove the side air curtain module. For additional information, refer to
Side Air Bag Module
(76.74.30)
(Section 501-20B )
17 .
Remove the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-
10 )
18 .
Remove the rear seat. For additional information, refer to
Rear Seat - Vehicles With: 60/40 Split
Seat (78.10.70/78.10.71)
(Section 501-10 )
19 .
Remove the wiring harness from the B-Pillar.
20 .
Release the wiring harness from the rocker panel.