LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2349002.png)
^
Remove the 2 screws.
8. Remove the rear bumper trim panel.
^
Release the 11 clips.
9. Remove the bumper insert.
^
Remove the 3 screws.
Vehicles with parking aid
10. Remove the parking aid sensor wiring harness.
Disconnect the 4 electrical connectors.
Vehicles with parking aid
11. Remove the parking aid sensor.
^
Release the 2 clips.
^
Repeat the above procedure for the remaining 3 sensors.
Vehicles with parking aid
12. Remove the parking aid sensor trim panel.
^
Release the 3 clips.
