LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2387001.png)
Hood Latch Release: Service and Repair
Hood Latch Release Handle
Service Repair No - 76.16.30
Removal
1. Remove the cowl side trim panel.
2. Disconnect the hood release cable from the connecting box.
^
Open the connecting box cover.
3. Remove the hood release lever housing.
^
Remove the bolt.
^
Disconnect the hood release cable.
Installation
1. Install the hood release lever housing.
^
Connect the hood release cable.
^
Tighten the bolt to 5 Nm (3.7 lb.ft).
2. Attach the hood release cable to the connecting box.
^
Close the connecting box cover.
3. Install the cowl side trim panel.
