LR3 (LA) V6-4.0L (2006)
1. Check torque of the front and rear body mount damper nuts.
2. Refer to Workshop Manual (GTR) Section 501-02 and install the engine undershield.
3. If any bushings have required replacement or torque-tightening has been required, road test the vehicle on the same route and check for 'knock' noise.
^ If 'knock' noise is still evident, continue to 'CHECK BODY MOUNT DAMPERS' below.
CHECK BODY MOUNT DAMPERS - RANGE ROVER SPORT ONLY
1. Remove rear body mount dampers.
2. Road test vehicle to verify noise is eliminated / still evident.
^ If noise is eliminated, replace rear dampers.
3. Remove front body mount dampers.
4. Road test vehicle to verify noise is eliminated / still evident.
^ If noise is eliminated, replace front dampers.
^ If noise is still evident, install original front dampers.
FRONT SUSPENSION GENERAL TORQUE CHECK
1. Refer to Workshop Manual (GTR) Section 501-02 and remove the engine undershield.