LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1453003.png)
11. Disconnect and re-connect all connectors between the ABS/DSC module and the suspect wheel speed sensor and check to see if the DTC clears.
12. Determine if the root cause of the problem is the sensor as follows:
*
Swap the left-hand and right-hand sensors on an axle.
*
Test drive the vehicle above a speed of 10 mph (16 kph).
*
If the fault moves with the sensor, the sensor is faulty.
13. If no faults have been found, clear all DTCs and take the vehicle on a test drive of at least 10 miles (16 km) above a speed of 10 mph (16 kph).
14. If there are no faults, the vehicle can be returned to the customer.
