LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-699004.png)
15. Remove the radiator.
^
Protect the elements from damage.
^
Remove the 2 radiator retaining bolts.
16. NOTE: Do not disassemble further if the component is removed for access only.
Remove the power steering fluid cooler line clip.
Installation
1. Install the power steering fluid cooler line clip.
2. Install the radiator.
^
Remove the element protection.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the radiator upper deflector.
4. Install the A/C condenser.
^
Secure in the clips.
^
Tighten the screws.
^
Tighten the bolt to 6 Nm (4 ft. lbs.).
5. Install the power steering fluid cooler.
^
Secure in the 3 clips.
6. Install the radiator securing pegs.
7. Install the transmission cooler hoses.
^
Install the clips.
8. Connect the radiator upper hose.
^
Secure with the clip.
9. Connect the expansion tank hose.
^
Secure with the clip.
10. Install the lower fan shroud.
^
Secure in the clips.
^
Secure the coolant hose.
11. Install the radiator grille.
12. Install the viscous fan assembly.
13. Refill the cooling system.
14. Connect the battery ground cable.
15. Check automatic transmission fluid level.
