LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-603003.png)
5. Using the special tool, install the RH cassette jackshaft drive, sprocket bolt.
^
Clean the component mating faces.
^
Using the special tool, tighten the new jackshaft sprocket bolt to 40 Nm (30 ft. lbs.), then a further 45 degrees.
6. Install the cylinder block jackshaft plug.
^
Clean the component mating faces.
7. Install the torque converter flexplate.
8. Connect the battery ground cable.
