LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-628001.png)
Engine Mount: Service and Repair
Engine Mount LH
Engine Mount LH
Service Repair No - 12.45.11
Removal
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
3. Remove the LH exhaust manifold.
4. Release the starter motor cable.
^
Release the terminal cover.
^
Remove the terminal nut insulator.
^
Remove the nut.
5. CAUTION: Protect the engine during this operation.
Remove the engine mount bracket.
^
Support the engine.
^
Remove the 4 bolts.
6. Remove the engine mount.
^
Remove and discard the 2 bolts.
Installation
1. Install the engine mount.
