LR3 (LA) V6-4.0L (2006)
Air Door Actuator / Motor: Service and Repair
Auxiliary Temperature Blend Door Actuator
Auxiliary Temperature Blend Door Actuator
Removal
WARNING: Eye protection must be worn.
1. Remove the climate control assembly.
NOTE: Note the fitted position.
2. Remove the blend door motor.
^
Disconnect the electrical connector.
^
Remove the 3 screws.
Installation
NOTE: Align to the position noted on removal.
1. Install the blend motor.
^
Tighten the screws.
^
Connect and secure the electrical connector.
2. Install the climate control assembly.
Auxiliary Blend Door Actuator
Auxiliary Blend Door Actuator
Removal
1. Disconnect the battery ground cable.
2. Remove the LH C-pillar lower trim panel
NOTE: Note the fitted position.
3. Remove the air distribution motor.
^
Disconnect the electrical connector.
^
Remove the 3 screws.