LR3 (LA) V6-4.0L (2006)
10. Alternately select 'Recirculation' and 'Fresh Air' mode on the climate control panel to open / close the recirculation flap, distributing the grease on the
lever.
^ It may be necessary to repeat the open / close cycle 10 times.
11. Verify noise has been eliminated.
12. Turn ignition 'OFF'.
13. If squeak / squeal noise is still evident, repeat steps 8 - 12.
14. Install stowage compartment tray.
15. Install the passenger side register trim panel.
16. Install the instrument panel console.
NOTE:
The Repair Procedure has changed extensively. The previous Repair Procedure is no longer valid and must no longer be performed.
GREASE RECIRCULATION FLAP LINKAGES - RANGE ROVER SPORT
1. Remove the audio side trim panel. (Figure 7)
^ Release the four clips.
2. Remove the center reinforcement trim panel. (Figure 8)