LR3 (LA) V6-4.0L (2006)
Blower Motor: Service and Repair
Blower Motor - Air Conditioning
Blower Motor
Service Repair No - 80.20.15
Removal
1. Remove the glove compartment.
2. Remove the passenger side closing trim panel.
^
Release the clip.
^
Remove the 2 screws.
^
Disconnect the electrical connector.
3. Position the footwell duct aside for access.
^
Release the clip.
4. Remove the blower motor.
^
Disconnect the electrical connector.
^
Remove the 3 screws.
Installation
1. Install the blower motor.
^
Tighten the screws.
^
Connect the electrical connector.
2. Secure the footwell duct.
^
Install the clip.
3. Install the closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
^
Tighten the screws.
4. Install the glove compartment.