LR3 (LA) V6-4.0L (2006)
Control Unit: Service and Repair
Differential Locking Module
Service Repair No - 51.30.01
Removal
1. Disconnect the battery ground cable.
2. Remove the C-pillar lower trim panel.
3. Release the parking aid module.
^
Remove the 2 nuts.
4. Remove the differential locking module.
^
Disconnect the 3 electrical connectors.
^
Remove the 3 bolts.
Installation
1. Install the differential locking module.
^
Install the bolts and tighten to 10 Nm (7 ft. lbs.).
^
Connect and secure the electrical connectors.
2. Install the parking aid module. h Tighten the nuts to 10 Nm (7 ft. lbs.).
3. Install the C-pillar lower trim panel.
4. Connect the battery ground cable.
5. Use T4 to calibrate a new differential locking module.