LR3 (LA) V6-4.0L (2006)
7.
Configure the Transfer Case Control Module:
^
Return to the 'Vehicle Configuration' screen and select 'Module Configuration.'
^
Select 'Configure Existing Modules.'
^
From the sub-menu, select 'Transfer Case Control Module.'
^
Check the tick-box to continue and follow the on-screen instructions.
^
Compare the on-screen software part number information that WDS will display with the software part number noted in step 6 above.
^
If the same tune level is displayed, terminate the tune download.
8.
Repeat step 6 to confirm the software level change.
9.
Exit the WDS session and disconnect the diagnostic equipment and battery charger from the vehicle.
Disclaimer