LR3 (LA) V6-4.0L (2006)
3.
Remove the three Torx screws to remove the steering column lower shroud. (Figure 15)
4.
Insert ignition key and turn to position 1.
NOTE:
The steering wheel will need to be rotated to gain access.
5.
Rotate steering wheel for access as necessary.
6.
Attach one foam pad (QZL500010) to the front face of the direction indicator switch. (Figure 16)
7.
Attach one foam pad (QZL500010) to the front face of the wiper switch.
8.
Install the steering column lower shroud.
9.
Install the steering column upper shroud.