LR3 (LA) V6-4.0L (2006)
Seat Belt Retractor: Service and Repair
Front Safety Belt Retractor
Front Safety Belt Retractor
Service Repair No - 76.73.13
Removal
1. Position the front seat fully forwards.
2. Make the SRS system safe.
3. Remove the B-pillar upper trim panel.
4. Release the safety belt upper anchor from the B-pillar.
^
Remove and discard the Torx bolt.
5. Release the front seat switch pack trim panel for access.
^
Remove the 2 screws.
6. Remove the front safety belt retractor.
^
Remove and discard the Torx bolt.
Installation