LR3 (LA) V6-4.0L (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor
Service Repair No - 18.30.24
Removal
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the CMP sensor.
^
Disconnect the electrical connector.
^
Remove the bolt.
^
Discard the O-ring seal.
Installation
1. To install, reverse the removal procedure.
^
Clean the component mating faces.
^
Tighten the bolt to 7 Nm (5 ft. lbs.).