LR3 (LA) V6-4.0L (2006)
Starter Motor: Service and Repair
Starter Motor
Service Repair No - 86.60.01
Removal
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Raise and support the vehicle.
3. Remove the exhaust system.
4. Remove the starter motor.
^
Remove the 2 bolts.
^
Remove the terminal upper cover.
^
Remove the terminal lower cover.
^
Remove the nut.
^
Disconnect the 2 electrical connectors.
Installation
1. Install the starter motor.
^
Clean the component mating faces.
^
Connect the electrical connectors.
^
Tighten the nut to 10 Nm (7 ft. lbs.).
^
Install the terminal lower cover.
^
Install the terminal upper cover.
^
Tighten the bolts to 45 Nm (33 ft. lbs.).
2. Install the exhaust system.
3. Connect the battery ground cable.