LR3 (LA) V6-4.0L (2006)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor
Service Repair No - 57.40.02
Removal
1. Disconnect the battery ground cable.
2. Remove the driver side closing trim panel.
^
Release the clip.
^
Remove the 2 screws.
^
Disconnect the electrical connector.
3. Disconnect the steering angle sensor electrical connector.
4. Disconnect the steering column intermediate shaft from the steering column.
^
Note the fitted position.
^
Remove the special bolt and discard the nut.