LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1769004.png)
CAUTION:
Ensure the circlip is correctly located in the slot by visually inspecting the extension of the circlip ears.
14. Install the circlip, ensuring correct location. (Figure 8)
15. Install by hand the new dirt excluder and top dust cover: (Figure 9)
^
Ensure the dirt excluder and dust cover are firmly seated.
16. Refer to Workshop Manual section 211-02: Power Steering > Removal and Installation > Steering Gear, and install the steering gear.
17. Start engine.
18. Verify no fluid leaks are evident from the steering housing.
Disclaimer
