LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1211003.png)
^
Tighten the 4 bolts to 10 Nm (7 ft. lbs.).
^
Install the selector cable to its abutment bracket.
4. Install the selector cable to its abutment bracket.
5. Install the transmission heat shield.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
6. Install the transmission support insulator.
^
Clean the component mating faces.
^
Tighten the bolts to 60 Nm (44 ft. lbs.).
7. Install the exhaust system.
8. Install the engine cover.
9. Connect the battery ground cable.
10. Refill the transmission with fluid.
