LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2818001.png)
Windshield Moulding / Trim: Service and Repair
A-Pillar Moulding LH
Removal
NOTE: This procedure is also applicable for the RH moulding.
1. Open the bonnet. Remove the A-pillar moulding.
^
Release and discard the 5 clips.
Installation
1. NOTE: The lower clip is unique to the others and must only be installed to the lowest position on the moulding.
To install, reverse the removal procedure.
1. New clips must be used.
