landrover Workshop Repair Guides

Land Rover Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

9. Remove the low tire pressure module.

^

Disconnect the 2 electrical connectors.

^

Remove the 2 bolts.

Installation

1. Install the low tire pressure module.

^

Tighten the bolts to 10 Nm (7 ft. lbs.).

^

Connect the electrical connectors.

2. Secure the LH side of the headliner.

^

Carefully secure the clips.

3. Install the LH passenger assist handles.

^

Install the screws.

^

Install the screw covers.

4. Install the sun visor retaining clip.

^

Install the screw.

^

Install the screw cover.

5. Install the LH sun visor.

^

Install the screws.

^

Install the screw covers.

^

Connect the electrical connector.

6. Install the LH C-pillar upper trim panel.
7. Install the LH B-pillar upper trim panel.
8. Install the LH A-pillar upper trim panel.
9. Connect the battery ground cable.

Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Wheels and Tires > Tire Pressure Module > Component Information > Specifications > Page 864

< PREV PAGE NEXT PAGE >